Square D Homeline 100 Amp 10-Space 20-Circuit Outdoor Ring-Type Main Breaker
MPN: SO1020VP
The Square D 100 Amp 10-Space 20-Circuit Outdoor Combination meter Socket and Main Breaker Load Center, Model SO1020M100S, is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for only overhead service applications. Meets EUSERC Specifications. Surface mount. This CSED is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers, except Plug-On Neutral breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline CSEDs are engineered for fast installation and wire savings.
Homeline 100 Amp 10-space 20-circuit ring-type surface mount main breaker CSED
Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers and (1) HOMT2020CP Homeline 2-20 Amp single-pole tandem breaker
Suitable for use as service entrance equipment
Accommodates plug-on secondary surge arrestor and features a plug-in design for easy installation
Ring-type design with no bypass
Compatible with Square D Homeline circuit breakers except Plug on Neutral
NEMA type 3R enclosure for outdoor use
4-jaw meter socket included in design
Designed with straight-in mains to save expensive cable and time
Thermoplastic interior assembly is among the most rugged in the industry
Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
Siemens SN 125 Amp 20-Space 40-Circuit Indoor Main Lug Load Center SN2040L1125
Brand: Siemens
Model: SN2040L1125
Condition: NEW
Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.
Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
SN series plug-on neutral load center includes 1 factory installed ground bars
Single phase load center
Aluminum bus
NEMA type 1 enclosure
Grey trim
Interrupt rating: 100000 AIC
UL Listed
If there are any problems with the item, please contact us so we can assist you as soon as possible. Our team at Garland Home Center specializes in most new and used brands and models worldwide, ensuring that your item will be as described when ordered. We have a dedicated and knowledgeable team ready to answer your questions during our business hours Monday – Friday 8:00 a.m. to 5:00 p.m. .
Garland Home Center is here to offer our customers the best items at affordable prices.
Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Leviton AFCI branch circuit breakers feature an intuitive color indicator in the handle, which designates operational status at-a-glance, as well as a line-side powered LED to indicate when a fault has occured.
EASY – The Load Center can be wired without any breakers present
SAFE – Reset lockout technology prevents use of compromised unit
INTUITIVE – LEDs communicate trip condition and type of fault
COMFORTABLE – Rocker-style switches require less force to operate
Compatible with Leviton brand load center electrical panels
Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Leviton AFCI branch circuit breakers feature an intuitive color indicator in the handle, which designates operational status at-a-glance, as well as a line-side powered LED to indicate when a fault has occured.
EASY – The Load Center can be wired without any breakers present
SAFE – Reset lockout technology prevents use of compromised unit
INTUITIVE – LEDs communicate trip condition and type of fault
COMFORTABLE – Rocker-style switches require less force to operate
Compatible with Leviton brand load center electrical panels
Leviton Circuit Breakers provide overload and short-circuit protection and feature an all plug-on design. All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired without circuit breakers installed. Branch circuit breakers can be easily plugged on at final installation. They also feature color indicators in the handle to easily see operational status at-a-glance. For applications up to 60 Amp when using copper wire or 50 Amp when using aluminum wire.
Simple – features an all plug-on design – no wiring to the circuit breaker
Intuitive – color indicators in the handle to easily see operational status at-a-glance
Approachable – contemporary aesthetic and rocker style handle are more user friendly
10 kA short-circuit rating
Compatible with Leviton brand load center electrical panels
Leviton Circuit Breakers provide overload and short-circuit protection and feature an all plug-on design. All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired without circuit breakers installed. Branch circuit breakers can be easily plugged on at final installation. They also feature color indicators in the handle to easily see operational status at-a-glance. For applications up to 60 Amp when using copper wire or 50 Amp when using aluminum wire.
Simple – features an all plug-on design – no wiring to the circuit breaker
Intuitive – color indicators in the handle to easily see operational status at-a-glance
Approachable – contemporary aesthetic and rocker style handle are more user friendly
10 kA short-circuit rating
Compatible with Leviton brand load center electrical panels
The CHN260GF Eaton Cutler-Hammer 60 Amp Ground Fault Circuit Breaker is a reliable and durable electrical component designed for exterior use. With a maximum amperage of 60A and two poles, this circuit breaker is suitable for various commercial and industrial applications. The Eaton brand ensures quality and performance, making it a trusted choice for electrical systems requiring a high level of protection and reliability.
Operating Temperature: 40 °C (104 °F)
Maximum Amperage: 60 A
Current Rating: 51-60 A
Material: ABS/Plastic
MPN: CHN260GF
Electrical Connection: Screw Terminal
Suitable For: Exterior
Tripping Characteristics: Type A
Operation Method: On/Off
Current Type: AC
Break Time: Instantaneous
Contact Configuration: Double Pole Single Throw (DPST)
Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. The Leviton Load Center with smart circuit breakers is the industry’s most intellegent residential circuit breaker system, offering powerful analytics and alerts, real-time energy consumption data, and the ability to remotely turn off individual circuits from anwhere.
MPN: LB230-SR
SMART – See energy data and breaker status in the My Leviton app
EASY – The Load Center can be wired without any breakers present
HYDRAULIC MAGNETIC – Operates as intended from -40°F to 185°F
INTUITIVE – LEDs communicate trip condition and type of fault
Leviton Circuit Breakers provide overload and short-circuit protection and feature an all plug-on design. All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired without circuit breakers installed. Branch circuit breakers can be easily plugged on at final installation. They also feature color indicators in the handle to easily see operational status at-a-glance. For applications up to 60 Amp when using copper wire or 50 Amp when using aluminum wire.
Simple – features an all plug-on design – no wiring to the circuit breaker
Intuitive – color indicators in the handle to easily see operational status at-a-glance
Approachable – contemporary aesthetic and rocker style handle are more user friendly
10 kA short-circuit rating
Compatible with Leviton brand load center electrical panels
Siemens 200-A 40-Circuit Main Breaker Plug-On Load Center with Copper Bus
Siemens PN Series Load Centers – a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.
Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
PN Series plug-on neutral load center includes 2 factory installed ground bars
5-PACK Midwest Electric 30-Amp 120/240-Volt Fused AC Disconnect (U035F2P)
Brand: Midwest Electric
The Midwest 30 Amp 120/240-Volt 240-Watt Fused (requires 2-fuses installed on the back side of the puller). AC Disconnect has a NEMA 3R-rated steel enclosure that is both rust- and corrosion resistant for outdoor use. This safety switch is intended to disconnect power from an air-conditioning unit and uses lug wire range AWG #14 – 3-copper/aluminum. This single-phase disconnect is ANSI certified and UL listed with a maximum load of 240-Volt.
Used to disconnect power from an air-conditioning unit
NEMA 3R-rated steel enclosure for outdoor use
Rust and corrosion resistant
Fusible – requires 2-fuses that are installed on the back side of the puller
Single phase
Lug wire range is AWG #14 – 3-copper/aluminum
120/240-Volt
3-HP maximum
Fuse classes accepted are: H, K1, K5, K9, RK1 and RK5 up to 30 Amps
2-PACK Midwest Electric 30-Amp 120/240-Volt Fused AC Disconnect (U035F2P)
Brand: Midwest Electric
The Midwest 30 Amp 120/240-Volt 240-Watt Fused (requires 2-fuses installed on the back side of the puller). AC Disconnect has a NEMA 3R-rated steel enclosure that is both rust- and corrosion resistant for outdoor use. This safety switch is intended to disconnect power from an air-conditioning unit and uses lug wire range AWG #14 – 3-copper/aluminum. This single-phase disconnect is ANSI certified and UL listed with a maximum load of 240-Volt.
Used to disconnect power from an air-conditioning unit
NEMA 3R-rated steel enclosure for outdoor use
Rust and corrosion resistant
Fusible – requires 2-fuses that are installed on the back side of the puller
Single phase
Lug wire range is AWG #14 – 3-copper/aluminum
120/240-Volt
3-HP maximum
Fuse classes accepted are: H, K1, K5, K9, RK1 and RK5 up to 30 Amps
7-PACK Leviton 20-Amp Heavy Duty Single-Pole Locking Toggle Switch Brown 1221-2L
Brand: Leviton
MPN: 1221-2L
The Leviton 1221-2L is a toggle locking single pole AC quiet switch in brown color. It offers a wide range of devices for different applications. These switches are intended to support extra heavy-duty applications. This 12212L single pole AC quiet switch has thermoplastic body and polycarbonate toggle. It is a self-grounding device, it has a voltage rating of 120/277 VAC and amperage rating of 20 Amp. This Leviton 12212L toggle locking single pole AC quiet switch has a minimum endurance of 50000 cycles. Buy with confidence and enjoy years of reliable use.
Top-of-the-line industrial quality
Heavy gauge copper alloy 1-piece arm for top performance
Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting
Fully enclosed switch mechanism in rugged housing for strength, track and arc resistance
Connecticut Electric manufactures new high quality replacement circuit breakers for Pushmatic load center that accept Pushmatic style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished ones should never be used.
Replacement Breaker: P220
2 Pole breaker in 1- ½” body
Intertek ETL Listing to UL Standard 489 for US and Canada – Molded case circuit breakers
Manufactured New by Connecticut Electric
Bolt On Type
20 AMP – 120/240 VAC – 10,000 AIC
May also be branded as Bulldog (i.e. Bulldog P220)
15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Leviton Decora Duplex Receptacle, Tamper Resistant, Straight Blade, Residential Grade, Grounding, All Screws Backed Out, With Ears, Quickwire Push-In and Side Wired, Steel Strap, 2008 NEC Compliant – Ivory
Shutter mechanism inside the receptacle blocks access to the contacts unless a two-prong plug is inserted, helping ensure hairpins, keys, etc., will be locked out
TR symbol on residential receptacles assures they meet the 2008 NEC requirement
Ultrasonic heavy-duty construction offers long, trouble-free service life
Protects children from electrical shock injuries
Double-wipe power contacts for reliable conductivity and plug retention
23-PACK Leviton 2-Gang Decorator Wall Plate in White 80409W
Brand: Leviton
MPN: 80409W
This stylish and functional wall plate is designed to fit standard size rocker switches and GFI (Ground Fault Interrupter) outlets, providing a seamless look for your electrical installations. Made from high-quality smooth plastic, this wall plate is not only durable but also easy to clean, making it a perfect addition to any room in your home.
This wall plate is ideal for residential and commercial applications, ensuring safety and compliance with electrical standards. Its sleek design complements any decor, making it suitable for living rooms, bedrooms, offices, and more. Upgrade your electrical fixtures with the Leviton Decora wall plate and enjoy a polished, professional finish in your space.
15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Leviton Decora Duplex Receptacle, Tamper Resistant, Straight Blade, Residential Grade, Grounding, All Screws Backed Out, With Ears, Quickwire Push-In and Side Wired, Steel Strap, 2008 NEC Compliant – Ivory
Shutter mechanism inside the receptacle blocks access to the contacts unless a two-prong plug is inserted, helping ensure hairpins, keys, etc., will be locked out
TR symbol on residential receptacles assures they meet the 2008 NEC requirement
Ultrasonic heavy-duty construction offers long, trouble-free service life
Protects children from electrical shock injuries
Double-wipe power contacts for reliable conductivity and plug retention
Featuring a look and feel that qualify them as modern classics, Leviton Decora (R) brand designer Rocker Switches add so much at a modest cost that no home should be without them. Their sleek simplicity and smooth, quiet operation stem from quality materials fitted to tight tolerances and finished with great care, ensuring years of trouble-free service. Easy to wire, they work with tungsten, fluorescent and resistive loads. Legendary Decora Designer Rocker Switches come in a variety of colors to harmonize with any decor. Their sturdy construction and dependable performance are everything you’d expect from the pre-eminent switch maker.
Switch frame shields against dust and fits in wallplate to prevent rocker binding
Terminal screws accept up to No. 12 AGW
Sturdy construction for long service life
Full-rated current capacity with tungsten, fluorescent or resistive loads, motor capacity is 80% of switch rating
Featuring a look and feel that qualify them as modern classics, Leviton Decora (R) brand designer Rocker Switches add so much at a modest cost that no home should be without them. Their sleek simplicity and smooth, quiet operation stem from quality materials fitted to tight tolerances and finished with great care, ensuring years of trouble-free service. Easy to wire, they work with tungsten, fluorescent and resistive loads. Legendary Decora Designer Rocker Switches come in a variety of colors to harmonize with any decor. Their sturdy construction and dependable performance are everything you’d expect from the pre-eminent switch maker.
Switch frame shields against dust and fits in wallplate to prevent rocker binding
Terminal screws accept up to No. 12 AGW
Sturdy construction for long service life
Full-rated current capacity with tungsten, fluorescent or resistive loads, motor capacity is 80% of switch rating
TORK 40 Amp 24-Hour Indoor/Outdoor Mechanical Time Switch
Brand: TORK
MPN: 1101B-P
This 24-hour, SPST Mechanical Time Switch is perfect for lighting, pumps, signs, air conditioning, water heaters and fans applications. The Automatic on/off control when operation is required at the same time every day makes it end user friendly. This basic timer will cover many of your single-phase needs.
Automatic ON – OFF control when operation is required at the same time every day, 7-days a week
Automatic operation: minimum on setting: 20 minutes, minimum off setting: 75 minutes
Temporary manual override: standard
Operating temperature range: -40 degree F to +165 degree F (-40 degree C to +74 degree C)
Naipo Metal Detector Professional Higher Accuracy Gold Detector with LCD Display
Brand: Naipo
MPN: GT-5090
Gross weight: about 2.90 lbs
Net weight: about 2.19 lbs
A reference for you to know what kind of metal is rejected depending on the DISC setting.
Position of the 11 o’clock: iron
Position of the 12 o’clock: Nickel coin (5￠)/pull tab
Position of the 1 o’clock: zinc coin
Position of the 3 o’clock: copper coin
Note: silver, gold, 25￠,50￠ and 50￠ cannot be eliminated
High Sensitivity Performance: The naipo detector sensor brings a deeper detection of 5.1’’ to get accurate locations. Use higher sensitivity levels when searching for very small or deep targets. Use lower sensitivity levels in locations where the detector is behaving erratically.
USER-FRIENDLY DESIGN: With a 30-42 inch adjustable stem, comfortable armrest, and anti-slip handle, this detector caters to enthusiasts of different heights. Embark on your treasure hunting journey with ease!
EASY TO USE: Two detection modes, one is discrimination mode and the other is all-metal mode. Whether it is an adult or a kid, it is easy and quick to master the operation skills.
WATERPROOF & VERSATILE: This adult metal detector features an 8-inch waterproof coil, perfect for underwater exploration at beaches, streams, and yards. Uncover lost treasures and add excitement to your hunts.
DISCOVER HIDDEN TREASURES: with this essential metal detector kit for adults, kids, and beginners—a perfect choice for starting a new hobby or embracing the excitement of bounty hunting.
IDEAL GIFT FOR BEGINNERS or KIDS: A great gift for metal detecting enthusiasts, friends, or family, offering shared enjoyment while uncovering artifacts like old coins, gold, tools, jewelry, and more.
EASY TO USE: Rotate the switch counterclockwise to OFF to turn off the unit. Rotate it clockwise away from OFF to turn on the unit. The metal detector with a pointer screen to display, it is more convenient that you can see the detection mode, sensitivity level, and battery condition. When the metal target is found, the meter pointer swings to the right.
2-PACK GE Circuit Breaker 70A Bolt On 120/240V 2P THQB2170
This GE Q-Line series circuit breaker (now manufactured by ABB) provides reliable overcurrent and short-circuit protection for residential and commercial electrical systems. The THQL2170 is a common choice for high-draw appliances and sub-panel feeds, offering the durability of a thermal-magnetic trip mechanism in a convenient plug-in format.
Key Features:
Plug-In Design: Compatible with standard GE PowerMark Gold and older GE load centers that accept Q-Line breakers.
HACR Rated: Specifically UL-listed for use with Heating, Air Conditioning, and Refrigeration equipment.
Dual Pole Protection: Provides 240V power by occupying two 1-inch spaces in your panel.
Reliable Performance: Features a 10kAIC interrupting rating, ensuring safety during high-fault current events.
2-PACK GE 50 Amp Double Pole Bolt-On Breaker (THQB2150)
MPN: THQB2150
The GE Q line circuit breakers are 1 in. W per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make and Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability.
THQB breakers are compatible with type AQ and AQC panel boards
Breaker trips to the center position
120 and 240 VAC
10 kAIC interrupting rating
Case is made of heat-resistant thermoset for stability and structural integrity
5-PACK GE 60-Amp Double Pole Bolt-On Breaker (THQB2160)
Brand: GE
MPN: THQB2160
The GE Q line circuit breakers are 1 in. W per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make and Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability.
THQB breakers are compatible with type AQ and AQC panel boards
Breaker trips to the center position
120 and 240 VAC
10 kAIC interrupting rating
Case is made of heat-resistant thermoset for stability and structural integrity
