20-PACK National Hardware 4 by 5/8 by 010 Inch Zinc Plated Steel Mending Brace
Mending plates steel boxed – less screws zinc plated length x width 4 x inches 5/8. 4 inch x 5/8 inch, zinc, mending plate, bulk. Designed for reinforcing, attaching, connecting and splicing panels and other home and industrial applications. Without screws, boxed loose.
20-PACK COBRA 501TS10 1/2 in. x 3-3/4 in. Wedge Anchor – 26043
The Parawedge anchor stud from Cobra is cold formed and consists of a threaded section with standard coarse bolt threads at 1 end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a 2-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole. 3 head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in 2 types of material: Carbon steel and 304 Stainless steel. Approvals: UL. Underwriters Laboratory – File #EX 4687.
Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8 in. to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor)
10-PACK COBRA 501TS10 1/2 in. x 3-3/4 in. Wedge Anchor – 26043
The Parawedge anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at 1 end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a 2-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole. 3 head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in 2 types of material: Carbon steel and 304 Stainless steel. Approvals: UL. Underwriters Laboratory – File #EX 4687.
Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8 in. to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor)
2-PACK SharkBite Max 1/2 in. Brass Push-to-Connect Coupling Fitting
This pack of 2 Sharkbite UR008 1/2″ x 1/2″ Push-to-Connect Straight Couplings are brand new and ready to help you with your plumbing needs. They are made to fit other Sharkbite fittings and adapters, and are perfect for use in a variety of industries from business to industrial. These couplings are easy to install and require no special tools, making them a convenient choice for any DIY project. With a reliable connection and durable construction, this pack of Sharkbite couplings is a great investment for any plumbing job.
Von Duprin 2227EO-SP28-3 Exit Only Non Fire-Rated Vertical Rod Exit Device
2227EO-SP28-3 Von Duprin 22 Series Non Fire Rated Surface Vertical Rod Exit Device in Sprayed Aluminum Finish
The Von Duprin 2227EO-SP28-3 series of Exit Device for all types of single and double doors is well constructed from heavy gauge rolled steel section with the proven heavy duty touch bar mechanism that has been used so successfully in all architectural grade Von Duprin touch bar devices. The 22 Vertical Rod exit device is the economical alternative, incorporating a modern touchbar styling and the hardware is UL listed for panic exit hardware. It is specifically designed for use in areas where frequent abusive treatment can be expected.
Features and Benefits:
Sprayed Aluminum Finish
ANSI Function: 01
It fits door stiles as narrow as 3-5/8″ (92 mm)
Device Lengths: 3 feet (914mm) i.e 3′ Device for 2′ 4″ – 3′ door
Fasteners: Includes 1-3/4″ (44mm) 2-1/4″ (57mm) wood and metal doors
Non-handed operation provides greater flexibility
All 22 series exit devices are UL listed for panic hardware and are certified to ANSI A156.3, 2001, Grade1.
Latch Bolt: Deadlocking anti-friction top and bottom bolt, 5/8″ (16 mm) throw
Strike: 299 strike dull black included as always
Hex key dogging feature standard
Device centerline from finished floor: 39-13/16″ (1011mm) at center of device
The Mandara cabinet pull from Liberty combines the simple strength of crisp lines with soft square silhouettes. Influenced by the Art Deco period, the Mandara collection is subtly luxurious without being loud. The Mandara Collection is also available in coordinating hooks, bath accessories, and bathroom faucets.
STYLE: Casual cabinet pull design adds a laid-back charm to your room
FINISH: Warm gray tone with smooth polished luster and brushed texture
DURABLE: Crafted from durable metal for years of enjoyment
EASY UPDATE: Refresh the look of your home in a weekend with cabinet knobs and pulls that reflect your style
MEASUREMENTS: 6-5/16 in. (160 mm) center to center screw mounting, rear-mount installation
TESTED FOR QUALITY: Tested and inspected to meet the Liberty brand’s quality standards, a Liberty Hardware brand
SCREWS INCLUDED: Installation hardware includes (2) 1″ screws
Everbilt 1/4 in.-20 x 2 in. Galvanized Carriage Bolt (50-Pack)
Carriage bolts from Everbilt have a smooth rounded head with a square neck underneath that locks into wood when tightened. Use with a pre-drilled hole and secure with a hex nut and washer to prevent spinning. They are great fasteners for decks, play equipment, docks, fencing, and furniture.
The unique design is great for connections where the head is not accessible for tightening
Made from galvanized steel for great corrosion resistance
The self-locking square neck and coarse threads fasten very securely
7-Pack GlideRite 9 in. Center Solid Modern Cabinet Bar Pull Satin Gold
Upgrade your kitchen and bathroom cabinets with these GlideRite 5000s Series solid cabinet bar pulls. These bar pulls add a modern touch to even the most traditional of cabinets and are a quick and inexpensive way to refresh a kitchen or bathroom. These pulls also come with standard #8-32 x 1 in. screws for easy installation.
Dimensions: 12 in. Length x 0.5 in. Width x 1.375 in. Projection
Center-to-Center Screw Spacing: 9 inches
Finish: Satin Gold — Material: Steel
Sold as a single pull
Mounting Hardware: Standard #8-32 x 1 in. installation screws included
Everbilt Electric Water Heater Installation Kit EBWCB-07-18EKIT
This is an Electric Water Heater Installation Kit by EVERBILT. It contains 2 flexible water connectors. This kit makes it easier to install your water heater.
Kit contains two 3/4 in. FIP x 3/4 in. FIP x 18 in. long corrugated stainless steel water connectors that can be used for both hot and or cold water connections
Includes 2-compression adapters for making connections to 3/4 in. copper water pipes
White thread sealing tape included
Bright stainless steel finish on water connectors
For electric water heaters
Female threaded ends
Compatible with both cold and hot water connections
Features a braided stainless steel material for water connection
Weiman Products Magic Heat-Proof Aluminum Space Eraser
Eliminates those hard-to-clean dirt-catching gaps. Space eraser prevents food, water, grease, and crumbs from falling and collecting between counters and appliances such as range or dishwasher. Space eraser is also designed for the washer and dryer and will cover both even and uneven surfaces. Simply drop into place. Wipe clean with mild soap and water.
5-PACK STZ Industries Nipple 1/4″ MIP each X 1/4″ D MIP Black Steel 2-1/2″ L
STZ nipples are the way to go when selecting gas pipe for your residence. Our durable, schedule 40 black steel is hydrostatically tested. Pipe, fittings and nipples are available in an array of sizes to fit residential and light commercial gas, LP and air applications.
NEW Honeywell Non-Programmable Thermostat w/ 1H/1C Single Stage Heating & Cooling
It doesn’t get much easier than the Honeywell Home Heat and Cool Non-Programmable Thermostat from Resideo. With simple switchback modes and a temperature dial that makes your setting clear, this thermostat provides good temperature control without complicated programming. It’s compatible with multiple heating and cooling systems.
Highlights
Simple and worry-free operation
Low voltage control of gas or oil heating and cooling equipment
Move lever to adjust temperature up or down
Bi-metal temperature sensor
Snap-action switch
Straight-forward analog presentation is easy to understand
Honeywell Non-Programmable Thermostat with 1H/1C Single Stage Heating & Cooling
It doesn’t get much easier than the Honeywell Home Heat and Cool Non-Programmable Thermostat from Resideo. With simple switchback modes and a temperature dial that makes your setting clear, this thermostat provides good temperature control without complicated programming. It’s compatible with multiple heating and cooling systems.
Highlights
Simple and worry-free operation
Low voltage control of gas or oil heating and cooling equipment
Move lever to adjust temperature up or down
Bi-metal temperature sensor
Snap-action switch
Straight-forward analog presentation is easy to understand
10-PACK Mandara 3 in. (76 mm) Classic Cocoa Bronze Cabinet Drawer Bar Pull
Inspired by the natural effervesence of water elements, the Bubble Glass knob from Liberty adds elegant sophistication to your room at an exceptional value. Artisan bubbles create a unique form in each knob, and reflect light to create an exquisite look in your room. Ideal for bathroom vanities or furniture makeovers.
STYLE: Casual cabinet knob design adds a laid-back charm to your room
FINISH: Clear glass knob with a soft brushed satin nickel base
DURABLE: Crafted from durable metal and sparkling glass for a beautiful accent
EASY UPDATE: Refresh the look of your home in a weekend with cabinet knobs and pulls that reflect your style
MEASUREMENTS: 1-1/8 in. diameter rear-mount installation
TESTED FOR QUALITY: Tested and inspected to meet the Liberty brand’s quality standards, a Liberty Hardware brand
SCREWS INCLUDED: Installation hardware includes (1) 1″ screw
The SPAX factor – for the craftsman that concentrates on the details, we work for you. For the pro that puts qualify first, we help you create stronger connections, enhance performance and improve results when your reputation is on the line. This high performance wood screw is not your average screw. While it is designed for wood applications it is also functional for other materials like masonry, drywall, plastic and up to 24ga steel. Masonry and concrete do require pre-drilling. It is made with carbon steel and coated for durability to fasten strongly and securely. U.S made SPAX is your trusted partner for your fastening needs. Do it Once, Do it Right with SPAX.
2-PACK Amerock Essential’ Z 3-3/4 in (96 mm) Stainless Steel Drawer Pull
The Amerock BP19002SS Essential’Z Stainless Steel 3-3/4 in (96 mm) Center-to-Center Pull is finished in Stainless Steel. Clean, classic lines in a casual relaxed style, the Essential’Z(TM) Stainless Steel Collection is designed to compliment any decor. Stainless Steel’s resistance to corrosion and staining, low maintenance and familiar luster make it an ideal material for many applications. Amerock offers a complete line of decorative and functional cabinet hardware, bath hardware, hook and rail and wall plates. Amerock’s award-winning decorative and functional hardware solutions have built the company’s reputation for chic design accessories that inspire homeowners to express their personal style. Available in a variety of finishes and styles, Amerock offers high quality designs at affordable prices. Always Creating. Always Timeless. Always Amerock.
3-3/4 in (96 mm) Center-to-Center pull
Finished in stainless steel
Intricately crafted with precise detail for lifelong beauty and durability
Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw)
5-PACK Amerock Essential’ Z 3-3/4 in (96 mm) Stainless Steel Drawer Pull
The Amerock BP19002SS Essential’Z Stainless Steel 3-3/4 in (96 mm) Center-to-Center Pull is finished in Stainless Steel. Clean, classic lines in a casual relaxed style, the Essential’Z(TM) Stainless Steel Collection is designed to compliment any decor. Stainless Steel’s resistance to corrosion and staining, low maintenance and familiar luster make it an ideal material for many applications. Amerock offers a complete line of decorative and functional cabinet hardware, bath hardware, hook and rail and wall plates. Amerock’s award-winning decorative and functional hardware solutions have built the company’s reputation for chic design accessories that inspire homeowners to express their personal style. Available in a variety of finishes and styles, Amerock offers high quality designs at affordable prices. Always Creating. Always Timeless. Always Amerock.
3-3/4 in (96 mm) Center-to-Center pull
Finished in stainless steel
Intricately crafted with precise detail for lifelong beauty and durability
Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw)
10-PACK Amerock Essential’ Z 3-3/4 in (96 mm) Stainless Steel Drawer Pull
The Amerock BP19002SS Essential’Z Stainless Steel 3-3/4 in (96 mm) Center-to-Center Pull is finished in Stainless Steel. Clean, classic lines in a casual relaxed style, the Essential’Z(TM) Stainless Steel Collection is designed to compliment any decor. Stainless Steel’s resistance to corrosion and staining, low maintenance and familiar luster make it an ideal material for many applications. Amerock offers a complete line of decorative and functional cabinet hardware, bath hardware, hook and rail and wall plates. Amerock’s award-winning decorative and functional hardware solutions have built the company’s reputation for chic design accessories that inspire homeowners to express their personal style. Available in a variety of finishes and styles, Amerock offers high quality designs at affordable prices. Always Creating. Always Timeless. Always Amerock.
3-3/4 in (96 mm) Center-to-Center pull
Finished in stainless steel
Intricately crafted with precise detail for lifelong beauty and durability
Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw)
Oatey Split Ring Pipe Hangers are designed to secure DWV pipe to wooden rafters, walls or joists. The split ring design allows for easy installation and enables the expansion and contraction of multiple pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.
1 in. split ring copper pipe hanger
Secures DWV pipes to wooden rafters, walls or joists
For use with copper, CPVC and PEX piping
Enables the expansion and contraction of multiple pipes
Split ring design allows for easy installation
Fits 1 in. pipes
Durable copper-plated construction provides corrosion resistance
Rigorously tested and proven to last in many conditions
HOMEWERKS 3/8″ COMP x 3/8″ COMP Stainless Steel Straight Water Hammer Arrestor
Fix the knocking noise in your pipes by using the Homewerks Water Hammer Arrestors. The banging sounds in your pipes is caused by sudden stop in the flow of high speed water resulting in an increase in pressure. Water Hammer Arrestors absorb the shock created by the spike in pressure to stop the banging and prevent pipe damage. Homewerks Water Hammer Arrestors are designed for residential use and can be used for up to 3 plumbing fixtures. Various connection sizes and types are offered for your convenience.
Stainless steel construction
AA size, can be used for 1-3 fixtures
Certified lead free and certified to ASSE standards
Install between a supply stop and stub-out or a supply line
