The RIDGID K-50 is a portable Drain Cleaning Machine designed to clean 1-1/4 in. to 4 in. drain lines. This sectional machine is ideal for clearing clogged lines in sink, shower and floor drains. The K-50 drain cleaner machine can run 3 different size cables: 5/16 in., 3/8 in. and 5/8 in. The machine is driven by a 1/6 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FORWARD/OFF/REVERSE control of the motor. The K-50 is designed to use 5/8 in. Dia sectional-type cable that has a quick-change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 400 RPM. The rotation of the cable is conveniently controlled by a clutch handle. The cable stops instantly when the clutch handle is released. The K-50 is also designed to use with the A-17 Adapters. Adapters will hold 5/16 in. or 3/8 in. continuous length cables. Rotation of the adapters is controlled by the clutch handle. The cable adapter is equipped with a quick-acting brake which immediately stops rotation of the drum when the clutch handle is pulled upward. The RIDGID K-50 Sectional Machine includes the machine only and operators manual.
Sewer machine features a unique, easy-to-use, instant-acting cable clutch maximizes operator control: pull handle down and cable spins at 400 RPM, release handle and cable stops instantly
Sewer machine is ideal for clearing tough blockages in sink, shower and floor drains
Drain machine designed to clean 1-1/4 in. to 4 in. drain lines
K-50 drain machine is capable of running 3 different size cables: 516 in., 38 in. and 58 in.
Drain cleaner machine is equipped with 115-Volt, 300-Watt motor that is approved by CSA and UL Standards
K-50 sectional machine includes machine only and operators manual
Lightweight drain cleaning machine weighs less than 40 lbs. for easy transport from jobsite to jobsite
2-PACK Tectite 3/4″ IPS Brass Push-Connect x 3/4″ CTS Street Transition Adapter
The Tectite by Apollo IPS Brass Push-To-Connect x CTS Street Transition Adapter is a reliable and versatile fitting designed to allow the user to transition from CTS (copper tube sized) pipe to IPS (iron pipe sized) pipe, typically PVC utilizing push-to-connect technology. The transition adapter has a IPS push-to-connect end indicated by the white collar and a CTS sized street or stem on the opposing end which is suitable for insertion into any existing or new CTS sized push-to-connect fitting. This versatility allows limitless options when it comes to converting from CTS to IPS sized pipes. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
Extremely versatile fitting allows for transition from CTS to IPS sized push-to-connect valves, tees, or any other push-to-connect fitting configuration
Also available in 1/2 in. and 1 in. sizes
Constructed of lead free dezincification resistant (DZR) brass for superior reliability
White collar indicates compatibility with PVC pipe
Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
Fittings can be rotated after being installed for ease of use in tight spaces
Ideal for potable water and hydronic heating applications
Listed by IAPMO and listed to ASSE 1061/NSF 61
Meets UPC, IPC, and cUPC standard requirements
Demount clips (included) allow for fitting removal and adjustment
Approved for behind-the-wall with no access and burial
Corrosion resistant for greater longevity
Maximum working pressure of 200 psi and maximum temperature of 250 degree F
2-PACK Tectite 1/2″ IPS Push-to-Connect x 1/2″ CTS Street Transition Adapter
The Tectite by Apollo IPS Brass Push-To-Connect x CTS Street Transition Adapter is a reliable and versatile fitting designed to allow the user to transition from CTS (copper tube sized) pipe to IPS (iron pipe sized) pipe, typically PVC utilizing push-to-connect technology. The transition adapter has a IPS push-to-connect end indicated by the white collar and a CTS sized street or stem on the opposing end which is suitable for insertion into any existing or new CTS sized push-to-connect fitting. This versatility allows limitless options when it comes to converting from CTS to IPS sized pipes. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
Extremely versatile fitting allows for transition from CTS to IPS sized push-to-connect valves, tees, or any other push-to-connect fitting configuration
Also available in 3/4 in. and 1 in. sizes
Constructed of lead free dezincification resistant (DZR) brass for superior reliability
White collar indicates compatibility with PVC pipe
Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
Fittings can be rotated after being installed for ease of use in tight spaces
Ideal for potable water and hydronic heating applications
Listed by IAPMO and listed to ASSE 1061/NSF 61
Meets UPC, IPC, and cUPC standard requirements
Demount clips (included) allow for fitting removal and adjustment
Approved for behind-the-wall with no access and burial
Corrosion resistant for greater longevity
Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Glacier Bay Shower Diverter in Chrome, Grey 3075-541
This Glacier Bay Shower Diverter is designed to change your fixed shower head to a combination fixed and hand held shower unit. The heavy brass construction has a clean chrome coating for enhanced corrosion resistance.
Slide switch selects between fixed and hand shower
1/2 in. female IPS inlet mounts to shower arm
1/2 in. male IPS front outlet, for standard front facing shower head
The Oatey 1 lb. Water-Soluble Lead-Free Tinning Flux is designed for use in joining or sweating copper pipe and fittings. The 100% lead-free formula has a petrolatum base for effective cleaning. NSF standard 14 and standard 61 certified for performance and health effects.
Effective on most metals, excluding aluminum and stainless steel
Compatible with common plumbing solder alloys
Formula resists turning copper piping green
Lead-free flux cleans and fluxes copper piping
Petrolatum base provides effective cleaning
Standard 14 (performance) and standard 61 (health effects) certified
T&S 12″ Swing Faucet Spout in Chrome Finish in Grey 062X
Brand: T&S
MPN: 062X
This OEM (original equipment manufacturer) T&S BRASS replacement swing nozzle spout 062X is 12 in. L with 3-3/4 in. clearance. This spout is applicable for commercial kitchens, schools, hospitals, nursing homes, health care markets and residential markets. Spout is equipped with a stream regulator outlet. Restore functionality to your faucet without the expensive of replacing the entire faucet.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-section 9 and NSF 372
Lustrous chrome finish
Solid brass tubular construction
Heavy duty commercial
Swivel nut fits all standard T and S BRASS swivel outlets
Westbrass White 1-1/2″ Tubular Tip Toe Bath Waste in Polished Chrome 593244-26
This poly insert style, cable driven bath waste uses overflow washers to easily conform to tub overflows of varying angles; and insert fittings with ferules to adjust heights. Insert style drain makes assembly a snap. Comes with overflow and stopper in many different finishes to meet any decor. 14 in. rough-in.
Finish:
Polished Chrome
UPC:
747028683890
Online Product ID:
5800184
Weight:
1.50 lbs.
Prop65 Warning:
This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
SharkBite 3/4 in. Push-to-Connect Fitting Stainless Steel Disconnect Tong U713A
Brand: SharkBite
The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.
Stainless steel for durability
Easy 1-handed operation
Color coded handle matches corresponding color on fitting bag
Available in 1/2 in., 3/4 in. and 1 in. sizes
Used with SharkBite copper tube size push-to-connect fittings
SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
Dimensions
Maximum compatible pipe size (in.): .75
Product Depth (in.): 5
Product Height (in.): 1.65
Product Length (in.): 1.27
Product Width (in.): 1
Details
Accessory Type: Collar
Compatible Pipe Material: Multi-Purpose
Connectivity: Push to Connect
Fitting/ Connector Collection: Specialty
Material: Plastic
Maximum working pressure (psi): 200
Maximum Working Temperature (F): 200
Minimum compatible pipe size (in.): .75
Pipe or Fitting Product Type: Fittings & Connectors
These 3/4″ x 3/4″ easy grip push-in ball valves are used to make quick, dependable connections with copper tubing, CPVC, and PEX pipes. They are ideal for use on residential and commercial plumbing, water heater, and hydronic heating system applications.
These brass push-in fittings meet the “lead-free” standards for use with potable water and are approved for underground installation as well as behind walls with or without access panels.
Since these fittings require no soldering, crimping, or solvents, they are ideal for wet repairs as well as new installations.
FEATURES:
Low Lead Brass-Meets Lead-Free Standards
Fitting can be removed and reused with the quick disconnect tool.
Maximum pressure is 200 psi.
Maximum temperature is 200° F (Water)
Polysulfone stiffener inserts included with every fitting.
Fittings can be rotated after assembly for easier installation.
Opella Pamper Your Pet Handshower in Chrome 201.364.110
Bathe your pet with ease and convenience with the Opella Pamper Your Pet 3-Mode Handshower Set. The handshower has a 3-way diverter and includes an 8-foot double-braided metal flex hose.
