Honeywell Zone Valve 1″ Sweat 2-Way 24-Volt V8043E1020
Brand: Honeywell
MPN: V8043E1020
Two-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water.
Honeywell Zone Valve, 2-Way Low Voltage, Series: V8043, 1 in Nominal, C, 125 psi, 3.5 Cv, 24 V, 0.32 A, 50 to 200 deg F Water Temperature, 20 psi Differential, 18 in Lead, Brass, 4 in H x 3-11/16 in W x 2-3/8 in D
Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored
All models may be installed without disassembling the valve
Compact construction for easy installation
Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
Actuator motor may be replaced without removing the valve body or draining the system
3-PACK RectorSeal PRO-Fit 3/8 in. Brass Quick Connect Service Valve
Brand: RectorSeal
PRO-Fit Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends and push to connect. Fittings are compatible with major refrigerants.
2-PACK RectorSeal PRO-Fit 3/8 in. Brass Quick Connect Service Valve
Brand: RectorSeal
PRO-Fit Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends and push to connect. Fittings are compatible with major refrigerants.
HOMEWERKS 3/8″ COMP x 3/8″ COMP Stainless Steel Straight Water Hammer Arrestor
Fix the knocking noise in your pipes by using the Homewerks Water Hammer Arrestors. The banging sounds in your pipes is caused by sudden stop in the flow of high speed water resulting in an increase in pressure. Water Hammer Arrestors absorb the shock created by the spike in pressure to stop the banging and prevent pipe damage. Homewerks Water Hammer Arrestors are designed for residential use and can be used for up to 3 plumbing fixtures. Various connection sizes and types are offered for your convenience.
Stainless steel construction
AA size, can be used for 1-3 fixtures
Certified lead free and certified to ASSE standards
Install between a supply stop and stub-out or a supply line
Glacier Bay Shower Diverter in Chrome, Grey 3075-541
This Glacier Bay Shower Diverter is designed to change your fixed shower head to a combination fixed and hand held shower unit. The heavy brass construction has a clean chrome coating for enhanced corrosion resistance.
Slide switch selects between fixed and hand shower
1/2 in. female IPS inlet mounts to shower arm
1/2 in. male IPS front outlet, for standard front facing shower head
These 3/4″ x 3/4″ easy grip push-in ball valves are used to make quick, dependable connections with copper tubing, CPVC, and PEX pipes. They are ideal for use on residential and commercial plumbing, water heater, and hydronic heating system applications.
These brass push-in fittings meet the “lead-free” standards for use with potable water and are approved for underground installation as well as behind walls with or without access panels.
Since these fittings require no soldering, crimping, or solvents, they are ideal for wet repairs as well as new installations.
FEATURES:
Low Lead Brass-Meets Lead-Free Standards
Fitting can be removed and reused with the quick disconnect tool.
Maximum pressure is 200 psi.
Maximum temperature is 200° F (Water)
Polysulfone stiffener inserts included with every fitting.
Fittings can be rotated after assembly for easier installation.
