SKU: 20342

3-PACK Cobra Anchors 5/8 in. x 5 in. Parawedge Anchor

The Parawedge anchor stud from Cobra is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole. Three head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in two types of material: Carbon steel and 304 Stainless steel. Approvals: UL.. Underwriters Laboratory – File #EX 4687

  • Parabolic mandrel for a smoother expansion
  • 360° 1-piece clip that functions as a 2-piece clip
  • Can be installed into bottomless hole
  • Cold formed for increased strength
  • Drill an appropriate size hole into base material.
  • Clean hole using a dust blower or compressed air
  • Insert the nut with a clearance of 1/8” to the top of the anchor
  • With a hammer or light mass, insert the anchor into the hole
  • Remove the nut and insert the object to be installed
  • Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor).

$19.99

3 in stock

476495632_1542218039710261_4262551173269293044_n

Related Products

Related products