SKU: 16375

Fisher Propane Integral Two Stage Regulator R232A-BBF

Integral Two-Stage regulators combine a First-Stage regulator and a Second-Stage regulator into one compact unit. Recommended for installations where piping distance is short. The Type R232A is an Underwriters Laboratories (UL) listed regulator designed for LP-Gas systems. The unit is designed to reduce the tank pressure to an outlet pressure of 11 inches water column through an integral two-stage system. Designed for installations with small domestic loads. The units compact size makes it ideal for tight fit applications.

Note: The first-stage screened drip-lip vent is oriented downward and the standard placement for the second-stage vent is oriented over the outlet.\

The Type R232A is designed using rugged time proven design concepts with enhancements to the corrosion resistance and durability of materials both internally and externally – With proper installation and periodic inspection and maintenance the Type R232A design has a 20-Year Recommended Replacement Life – In some environmental conditions earlier replacement may be required
Improved Regulations: Fisher’s large molded fabric-reinforced diaphragm and spring assisted vent stabilizer deliver accurate, stable regulation
Superior Overpressure Protection: The combination of a high capacity relief valve and large vent provide overpressure protection which exceeds UL standards
Easy System Checks: 1/8 inch NPT inlet and outlet gauge taps orificed to a number 54 drill sized are easily accessible for gas system checks.
Corrosion-Resistant: Added corrosion resistance with an internal and external coating process for all castings prior to painting, stainless steel relief valve spring and retainer and a non-corrosive relief valve seat
Positive Drainage: When installed properly with the spring case pointed down the Fisher Positive Drainage design allows any moisture formed in the spring case to drain out eliminating the problems with corrosion and freezing of the water in the spring case

Type: R232A-BBF
Capacity (Propane): 550,000 BTU/HR
Inlet Connection: 1/4 in. FNPT
Outlet Connection: 1/2 in. FNPT
Material: Aluminum
Max Allowable Inlet Pressure: 250 psig (17.2 bar)
Outlet Pressure Ranges: 10.2 to 13 in. w.c. (25 to 32 mbar)
Vent Size
- 1st Stage: 7/16-24 Inverted Flare
- 2nd Stage: 3/8 in. NPT Screened
Temperature Capabilities: -20° to 160°F (-29° to 71°C)
Certifications: UL, CRN
Color: Gray, for easy identification