| Item: Deep Well Submersible Pump Motor | Shell Material: Corrosion Resistant Stainless Steel |
| Shaft Material: Splined Stainless Steel | Overload Relay Required: No |
| Motor Application: Pump | Lead Length: 48 in |
| Nameplate RPM: 3,450 | Voltage: 115V AC |
| HP: 1/3 | Motor Service Factor: 1.75 |
| Motor Thermal Protection: Auto | Height: 8 3/4 in |
| Phase: Single | Number of Wires: 3 |
| Motor Enclosure Design: Totally Enclosed Nonventilated | Full Load Amps: 8.0 |
| Stator Type: Hermetically Sealed | Dia.: 4 in |
| Thrust Rating: 300 lb | Hz: 60 |
| Starter Required: No | Max. Ambient Temp.: 86 Degrees F |
| Diaphragm Type: Pressure Equalizing | Max. SF Amps: 9.2 |
| Motor Sub Application: Well Submersible Pump | Motor Shaft Rotation: CCWSE |
| RPM Range: 3,001-3,600 | Motor Design: Capacitor-Start |
| Standards: ANSI/NSF 61 Certified, CSA Certified, Industry Standard NEMA Mounting Dimensions, UL 778 Recognized | Overload Relay Max. Amp Setting: Not Applicable |
| Motor Bearings: Thrust | Usable @ 208V: No |
| No. of Speeds: 1 | Length Less Shaft: 8 3/4 in |
| Weight: 17 lb | Usable @ 200V: No |
| Body Dia.: 4 in | Duty Cycle: Continuous |
| Bolt Circle Dia.: 2 3/8 in | Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC |
| Bearing Protection: Water Slingers | Country of Origin (subject to change): Mexico |
$219.99
Out of stock
