DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing.
Maintains constant flow of 1 GPM at 7.25 to 58 psi
Pack of 100, 1 GPH PC drip emitter with barb
Contain a diaphragm that continuously adjusts to varying water pressure to ensure a constant flow rate, even in challenging topographical conditions
Ideal use is for slopes, oddly shaped areas, sites with high winds and long runs
Consistent flow enables a longer lateral over a wide range of pressures
Can be installed directly poly tubing or micro tubing
Raised nipple outlet prevents water runoff along the drip lateral
Available in 1 GPH black, 2 GPH green and 4 GPH red
Resistant to chemicals and fertilizers used in landscape application
DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing.
Maintains constant flow of 1 GPM at 7.25 to 58 psi
Pack of 100, 1 GPH PC drip emitter with barb
Contain a diaphragm that continuously adjusts to varying water pressure to ensure a constant flow rate, even in challenging topographical conditions
Ideal use is for slopes, oddly shaped areas, sites with high winds and long runs
Consistent flow enables a longer lateral over a wide range of pressures
Can be installed directly poly tubing or micro tubing
Raised nipple outlet prevents water runoff along the drip lateral
Available in 1 GPH black, 2 GPH green and 4 GPH red
Resistant to chemicals and fertilizers used in landscape application
Tesla Charger – This Level 1/Level 2 Charger is compatible with all Tesla or any EV that uses the North American Charging Standard (NACS). Simply press the button on the ev connector to open the Tesla charging port cover to charging. With best in the market 2-year product warranty, this Tesla EV charger is your best selection for home charging solution.
Flexible charging – it comes with interchangeable plugs – one for regular household outlets (NEMA 5-15) and another for high-power outlets (NEMA 14-50) so, whether you’re at home or somewhere with a more powerful socket, this charger has got you covered
Fast and efficient – up to 40 Amps of input power and 9.6 kW charging rate for fast charging, providing a convenient and rapid charging experience
Compact and convenient – this portable Tesla charger boasts a sleek design and is incredibly user-friendly, with a 25 ft. cable, it effortlessly reaches most driveways or garages, you can say goodbye to concerns about parking too close to an outlet
DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 psi. to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing.
Maintains constant flow of 2 GPH at 7.25 psi to 58 psi
Pack of 25, 2 GPH PC drip emitter with barb
Contain a diaphragm that continuously adjusts to varying water pressure to ensure a constant flow rate, even in challenging topographical conditions
Ideal use is for slopes, oddly shaped areas, sites with high winds and long runs
Consistent flow enables a longer lateral over a wide range of pressures
Can be installed directly into poly tubing or micro tubing
Raised nipple outlet prevents water runoff along the drip lateral
Available in 1 GPH black, 2 GPH green and 4 GPH red
Resistant to chemicals and fertilizers used in landscape application
DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 psi. to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing.
Maintains constant flow of 2 GPH at 7.25 psi to 58 psi
Pack of 25, 2 GPH PC drip emitter with barb
Contain a diaphragm that continuously adjusts to varying water pressure to ensure a constant flow rate, even in challenging topographical conditions
Ideal use is for slopes, oddly shaped areas, sites with high winds and long runs
Consistent flow enables a longer lateral over a wide range of pressures
Can be installed directly into poly tubing or micro tubing
Raised nipple outlet prevents water runoff along the drip lateral
Available in 1 GPH black, 2 GPH green and 4 GPH red
Resistant to chemicals and fertilizers used in landscape application
10-PACK National Hardware Hinges 1-1/2″ By 1-1/4″ Oil Rubbed Bronze N211-020
Commercial door hinges steel -square corner -full mortise standard weight template 4-1/2 x 4-1/2 inch bagged (swl) 90 lbs. Finish=prime coat. Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws.
Capacity: Architectural Grade Hinges
Color: USP Prime Coat Gray
Installation: Mortise With Metal Machine & Wood Screws
Material: Cold Rolled Steel
Product Class: Commercial Template Square Corner Door Hinges
Size: 4-1/2 Inch
You will recieve 5 Packs with 2 Hinges each [ 10 Pieces Total ]
4-PACK National Hardware Hinges 1-1/2″ By 1-1/4″ Oil Rubbed Bronze N211-020
Commercial door hinges steel -square corner -full mortise standard weight template 4-1/2 x 4-1/2 inch bagged (swl) 90 lbs. Finish=prime coat. Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws.
Capacity: Architectural Grade Hinges
Color: USP Prime Coat Gray
Installation: Mortise With Metal Machine & Wood Screws
Material: Cold Rolled Steel
Product Class: Commercial Template Square Corner Door Hinges
Size: 4-1/2 Inch
You will recieve 2 Packs with 2 Hinges each [ 4 Pieces Total ]
Commercial Door Hinge 6 PACK National Hardware 4-1/2 in N236-014
Commercial Door Hinge by National Hardware (6 PACK)
Commercial door hinges steel -square corner -full mortise standard weight template 4-1/2 x 4-1/2 inch bagged (swl) 90 lbs. Finish=prime coat. Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws.
Capacity: Architectural Grade Hinges
Color: USP Prime Coat Gray
Installation: Mortise With Metal Machine & Wood Screws
Material: Cold Rolled Steel
Product Class: Commercial Template Square Corner Door Hinges
Size: 4-1/2 Inch
Product has a 30 Day Warranty unless an alternate warranty is in place.
If there are any problems with the item, please contact us so we can assist you as soon as possible. Our team at Garland Home Center specializes in most brands and models worldwide, ensuring that your item will arrive to you ready for whenever you need it. We have a dedicated and knowledgeable team ready to answer your questions during our business hours Monday – Friday 8:00 a.m. to 5:00 p.m. .
Garland Home Center is here to offer our customers in the best products at affordable prices.
2-PACK National Hardware Heavy Duty T-Hinge 8 Inch Galvanized Steel N129-494
T-hinges extra heavy – steel lgth 8 inches Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Product Overview: Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Heavy-duty. Manufactured with hot-rolled steel.
Offset screw holes for extra strength and to prevent wood from splitting
Tight pin allows for right or left hand applications
National Hardware Heavy Duty T-Hinge 8 Inch Galvanized Steel N129-494
T-hinges extra heavy – steel lgth 8 inches Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Manufactured with hot-rolled steel. Product Overview: Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Heavy-duty. Manufactured with hot-rolled steel.
Offset screw holes for extra strength and to prevent wood from splitting
Tight pin allows for right or left hand applications
3-PACK National Hardware N347-674 Eye Bolt With Nut 5/8 By 8 Inch
Designed for industrial and home applications. All eye bolts have standard machine screw threads – course thread on extra large sizes ( 1/2 In. x 12 In.) Interior and exterior applications. Manufactured from steel wire. Zinc.
Eye Bolts zinc 5/8-inch diameter 8 inches in length.
For use in exterior and interior applications. Hex nut included.
2-PACK National Hardware N351-015 Door Hinge 4″ 5/8 Radius in Oil Rubbed Bronze
4 Inch spring adjustable self closing door hinge, manufactured with cold rolled steel, closing speed is adjustable, fits standard cutouts, tension is adjustable, 5/8 inches radius round corners. Hinge is UL approved for fire doors which must use a minimum of 2 spring and one conventional hinge per door. Doors weighing up to 50 pounds require 1 spring hinge, doors up to 85 pounds require 2 spring hinges. Doors up to 110 pounds require 3 spring hinges. Conforms to ANSI/BHMA Standard A156.17-2004. *NFPA-80 requires fire labeled doors to have a minimum of 2 spring hinges. NOTE: All hinges must have pivot points aligned for smooth operation. Always use same hinge sizes.
Closing speed is adjustable
Tension is adjustable
5/8 in radius round corners
Automatically closes doors
Fully adjustable with wrench provided
Easy to install
Capacity: 37 Pounds Per Hinge
Color: Oil Rubbed Bronze
Feature: Adjustable Tension
Installation: Mortise With Metal Machine & Wood Screws
250-PACK National Hardware Chains 3/4 in. Cup Hook VS2021 3/4 CUP HOOK
National Hardware Cup Hook, Working Load Limit: 10 lb, Opening Size: 0.27 in, Projection Size: 0.76 in, Wire Diameter: 0.09 in, Thread Length: 0.3 in, Brass, Solid Brass, 1.14 in L
Brand: National Hardware
VPN: N200-303
Designed for hanging home and industrial products
Solid brass construction for maximum corrosion protection
100-PACK National Hardware Chains 3/4 in. Cup Hook VS2021 3/4 CUP HOOK
National Hardware Cup Hook, Working Load Limit: 10 lb, Opening Size: 0.27 in, Projection Size: 0.76 in, Wire Diameter: 0.09 in, Thread Length: 0.3 in, Brass, Solid Brass, 1.14 in L
Brand: National Hardware
VPN: N200-303
Designed for hanging home and industrial products
Solid brass construction for maximum corrosion protection
10-PACK National Template Spring Door Hinge 4″ in Satin Nickel N350-801
4 Inch spring adjustable self closing door hinge, manufactured with cold rolled steel, closing speed is adjustable, fits standard cutouts, tension is adjustable, square corners. Hinge is UL approved for fire doors which must use a minimum of 2 spring and one conventional hinge per door. Doors weighing up to 50 pounds require 1 spring hinge, doors up to 85 pounds require 2 spring hinges. Doors up to 110 pounds require 3 spring hinges. Conforms to ANSI/BHMA Standard A156.17-2004. *NFPA-80 requires fire labeled doors to have a minimum of 2 spring hinges. NOTE: All hinges must have pivot points aligned for smooth operation. Always use same hinge sizes.
Closing speed is adjustable
Tension is adjustable
Square corners
Automatically closes doors
Fully adjustable with wrench provided
Lifespan warranty against defects in material and workmanship
Easy to install
Use anti-friction hinges with spring hinges for best spring performance
2-PACK National N350-835 Spring Door Hinge 3-1/2″ x 1/4″ Radius in Satin Nickel
3-1/2 Inch spring adjustable self closing door hinge, manufactured with cold rolled steel, closing speed is adjustable, fits standard cutouts, tension is adjustable, 1/4 inches radius round corners. Hinge is UL approved for fire doors which must use a minimum of 2 spring and one conventional hinge per door. Doors weighing up to 50 pounds require 1 spring hinge, doors up to 85 pounds require 2 spring hinges. Doors up to 110 pounds require 3 spring hinges. Conforms to ANSI/BHMA Standard A156.17-2004. *NFPA-80 requires fire labeled doors to have a minimum of 2 spring hinges. NOTE: All hinges must have pivot points aligned for smooth operation. Always use same hinge sizes.
Closing speed is adjustable
Tension is adjustable
1/4 in radius round corners
Automatically closes doors
Fully adjustable with wrench provided
Lifespan warranty against defects in material and workmanship
Easy to install
Use anti-friction hinges with spring hinges for best spring performance
Capacity: 30 Pounds Per Hinge
Color: Satin Nickel
Feature: Adjustable Tension
Installation: Mortise With Metal Machine & Wood Screws
5-PACK National Hardware Closet Pole Socket Set For 1-3/8″ N269-068
Wood Pole Socket Set For 1-3/8 Poles. Designed for mounting wood closet poles. For up to a 1- 3/8 inches diameter pole. Natural finish allows pole sockets to easily be stained or painted to give a finished, attractive and consistent look. Includes fasteners. Safe working load is 120 pounds.
20-PACK National Hardware Corner Braces 1-1/2″ By 5/8″ By 0.08″ – N190-827
Corner Braces 1-1/2 By 5/8 By 0.08 Inch Brass Finish Steel 4 Pack With Screws. Hole sizes fit Phillips Flat Screws sized #7. Drill a pilot hole with a 3/32 inches sized drill bit when using wood screws. Designed for chests, screens, windows, furniture, etc. Used for reinforcing inside of right angle corner joints. Screw holes are countersunk.
Hole sizes fit Phillips flat screws sized #7
Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
Black powder coat finish for improved weather resistance
Used for reinforcing inside of right angle corner joints
National Hardware U-Bolt Plate and Nuts Square 5/16x2x3 10-PACK N222-356
National Hardware U-Bolt Plate and Nuts Square
U-bolts square bend – steel 5/16 inches diameter thread zinc plated – bulk pak width x length 2 x inch 3 threaded length 1-1/2 inch Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc steel resists rust. Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Designed for securing various products to rectangular wood and metal objects
When subjected to 312 hr of salt fog spray testing, zinc-plated hardware showed severe corrosion while hardware with WeatherGuard protection withstood these harsh conditions with very little deterioration
5-PACK National Hardware N222-356 Square U-Bolt Plate & Nuts 5/16″ x 2″ x 3″
U-bolts square bend – steel 5/16 inches diameter thread zinc plated – bulk pak width x length 2 x inch 3 threaded length 1-1/2 inch Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc steel resists rust. Supplied with straps and hex nuts assembled. For exterior and interior applications. Zinc plated steel resists rust.
Designed for securing various products to rectangular wood and metal objects
When subjected to 312 hr of salt fog spray testing, zinc-plated hardware showed severe corrosion while hardware with WeatherGuard protection withstood these harsh conditions with very little deterioration
10-PACK National 1-1/2 In. Stainless Steel Cup Hook N348-458
1-1/2 inch, stainless steel, cup hook, designed for use in kitchens, craft projects, hanging exterior decorations, etc, visual pack. Safe Working Load (SWL) 15 lbs.
Stainless steel for maximum corrosion resistance
Easy installation
Sharp screw point bites into wood easily and quickly
For interior and exterior applications
Sharp screw point bites into wood easily and quickly
