5-PACK Cobra Anchors 5/8 in. x 5 in. Parawedge Anchor
The Parawedge anchor stud from Cobra is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole. Three head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in two types of material: Carbon steel and 304 Stainless steel. Approvals: UL.. Underwriters Laboratory – File #EX 4687
Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material.
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8” to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor).
3-PACK Cobra Anchors 5/8 in. x 5 in. Parawedge Anchor
The Parawedge anchor stud from Cobra is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole. Three head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in two types of material: Carbon steel and 304 Stainless steel. Approvals: UL.. Underwriters Laboratory – File #EX 4687
Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material.
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8” to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor).
Defiant Olympic Stainess Steel Bed/Bath Privacy Door Handle
Affordably outfit interior doors with this lockable lever set from Defiant. The Olympic Privacy Lever easily mounts to doors 1-3/8 in. to 1-3/4 in. thick with the included hardware. A new design feature is the 70 mm rose plate that easily covers paint rings left from previous door hardware installations. Perfect for bedroom and bathroom doors beyond which privacy is sometimes desired. Provided with this set is an adjustable backset and interchangeable faceplates for drive-in and traditional installations. This sturdy lever nicely coordinates with other fixtures in your home for a cohesive look.
Featuring 70 mm rose to cover old paint marks around lever
Easy installation and replacement with just a Phillips screwdriver
Included hardware for easy installation
Privacy lockset includes 2 levers 1 for each side of the door
Locks from the inside with a turn button and unlocks from the outside with a coin or flat piece of metal
Compatible with doors 1-3/8 in. to 1-3/4 in. thick
Dual backset latch that fits both 2-3/8″ and 2-3/4″ backsets with no adjustment required
Defiant offers a Stainless Steel entry combo pack that is proven for durability and security. The new design feature of a 70 mm Rose Plate conveniently covers paint rings left from old door hardware removal. The design of Saturn provides easy installation with only a Phillips screwdriver needed. Additional security provided by the true Stainless Steel deadbolt. This set is most effective for exterior doors where keyed entry and security is needed. Defiant keyed locks can be re-keyed to fit your existing KW1 keyway.
Limited Lifetime guarantee
Dual backset knob latch that fits both 2-3/8″ and 2-3/4″ backsets with no adjustment required
Includes 4 keys and mounting hardware
New 70 mm rose to cover blemishes left from previous hardware
For residential use
True stainless steel
Compatible with doors 1-3/8 in. to 1-3/4 in. thick
Easy replacement installation with only a screwdriver
Kwikset San Clemente Matte Black Single Cylinder Low Profile Door Handleset
Step up to designer styles and superior security with Kwikset Signature Series products. The San Clemente handle set has a sleek, modern look. With clean lines and a variety of finishes, you can easily upgrade the entry to your home. San Clemente also features an adjustable screw that allows for easy door mounting and a guaranteed fit. The latch bolt is operated by the thumb piece on the outside and the grip on the inside. The deadbolt is operated by a key on the outside and a thumb turn on the inside. The rich tones of Matte Black add the finishing touch to this product. The Matte Black finish provides a rich and warm complement to the product’s style.
Handleset with deadbolt: use on exterior front doors with two bore holes, comes with interior lever and locking deadbolt turn piece, key operated from outside
Smartkey Security: Kwikset’s SmartKey Security technology protects against advanced break-in techniques and allows you to re-key your lock yourself in seconds
Easy install: do it yourself, installs in minutes with just a screwdriver, all the hardware you need is included for a hassle-free installation, detailed directions provided
Fits standard doors: fits standard size doors 1-3/8 in. to 1-3/4 in. thick, latch backset adjusts to either 2-3/8 in. or 2-3/4 in. by sliding the adjustment pin during installation
Adjustable Latch: With just a twist during installation, the latch backset can be adjusted to either 2-3/8 in. or 2-3/4 in. in order to fit all standard door preparations
Defiant Hartford Matte Black Bed/Bath Door Knob Contractor Pack (6-Piece)
Brand: Defiant
MPN: 32TGX910BD6
Affordably outfit latching interior doors with this lockable knob 6-pack from Defiant. The Hartford Privacy knob easily mounts to most standard doors with the included hardware, perfect for bedroom and bathroom doors beyond which privacy is desired. It features a new 2.75 in. Rose, dual backset and interchangeable faceplates for drive-in or traditional installations. A limited lifetime guarantee ensures that this device will withstand frequent use with the finish intact.
Lockable privacy knob that can be unlocked from the outside with a small flat object such as a coin or thumb nail allows you to control access to certain areas of your home like bedrooms and bathrooms
Features new 2.75 in. rose that allows coverage of paint marks when replacing old door hardware
Multiple units in 1-box provides customer convenience
Latch features a radius face plate or can be easily converted to drive-in style
Easy replacement installation with only a screw driver (sold separately)
3-Pack Everbilt Heavy Duty Zinc Universal Hardware Pack-Shelving Hardware
Brand: Everbilt
This Heavy-Duty Hardware Pack will help organize any room. The pack includes all necessary hardware to install heavy-duty tracks and wood shelves. Compatible with the heavy-duty double slot track shelving system.
Used to install heavy-duty tracks and shelves sold separately
All metal construction
Includes all hardware needed for installation of heavy-duty shelving system
Philips head design
Including number 10 in. x 2 in. screws, number 6 in. x 2 in. screws and number 6 in. x 1-1/4 in. screws
Elmdor Access Metal Door 14″ x 14″ DW Prime Coat P040-005-PLO
This Elmdor/Stoneman inspection door is the perfect addition to your home or office. Measuring 14″ x 14″, this metal door is durable and prime coated for a sleek finish. The DW design adds an extra touch of style to your space. The brand is known for their quality products and this door is no exception. Whether you need it for inspections or just want to add a touch of elegance to your building, this Elmdor access metal door is the perfect choice.
Hidden deck screws for any board. Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners. Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking. Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place. Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system. Available in PROTECH exterior coating and 316 stainless steel.
For use exclusively with the CAMO MARKSMAN system
Fastens on the edge of the board, for a fastener-free deck top
Hidden deck screws for wood and composite deck boards
316 Stainless steel offers maximum corrosion protection and is suitable for cedar, pressure-treated lumber, hardwood, PVC, composite or synthetic boards
Edge installation reduces splitting, cracking, and maintenance for a barefoot approved deck top
Most materials do not require pre-drilling
Rake tip augers material from the hole, preventing the deck board from splitting and cracking
Aggressive lower threads hold the deck board to the joist
Reverse upper threads hold the deck board in place
Trim head to seat the deck screw below the deck surface
T15 star drive is designed for strong bit engagement
T15 star drive bit for square boards included in every pail, grooved bits sold separately
Predrilling is recommended for hardwood and capped PVC boards, see the CAMO predrill bit
5000 PACK Porter Cable 1-1/2 in. x 15-Gauge Glue Collated Nail [ 1000 Per Box ]
Porter Cable 2 in. x 15-Gauge Glue 1M Bright Steel Angled Finishing Nails feature a bright finish and a 34° angled design. These durable, glue-collated steel fasteners are built for indoor applications and measure 2 in. L. The convenient 1000-piece pack allows you to always keep your nailer loaded.
5-PACK Richelieu Livingston Collection 3-1/2″ Brushed Nickel Cabinet Bar Pull
With its clean lines, this Richelieu practical wire pull will give your kitchen and bathroom cabinets a modern look. Please note that the screws included with the products are a standard size of 1 in (25 mm) length, quadrex, pan head. They will fit with most of the popular melamine thicknesses, which range between 5/8 in to 3/4 in (16 mm to 19 mm).
Functional cabinet and drawer handle for kitchens and bathrooms
RoHS Certified: Certified lead-free, mercury-free, cadmium-free, and hexavalent chromium-free
Center to Center measurement (distance between the drill holes): 3 1/2 in (89 mm)
Length (from left to right): 3 13/16 in (97 mm)
Width (top-to-bottom): 5/16 in (8 mm)
Projection (front to back): 1 3/16 in (30 mm)
Finish: Brushed Nickel, made of Steel
Included: Mounting hardware is included for an easy installation (8/32 screws)
10-PACK Richelieu Livingston Collection 3-1/2″ Brushed Nickel Cabinet Bar Pull
With its clean lines, this Richelieu practical wire pull will give your kitchen and bathroom cabinets a modern look. Please note that the screws included with the products are a standard size of 1 in (25 mm) length, quadrex, pan head. They will fit with most of the popular melamine thicknesses, which range between 5/8 in to 3/4 in (16 mm to 19 mm).
Functional cabinet and drawer handle for kitchens and bathrooms
RoHS Certified: Certified lead-free, mercury-free, cadmium-free, and hexavalent chromium-free
Center to Center measurement (distance between the drill holes): 3 1/2 in (89 mm)
Length (from left to right): 3 13/16 in (97 mm)
Width (top-to-bottom): 5/16 in (8 mm)
Projection (front to back): 1 3/16 in (30 mm)
Finish: Brushed Nickel, made of Steel
Included: Mounting hardware is included for an easy installation (8/32 screws)
2-PACK Prime-Line Bright Brass, Ball Bullet Catch and Strike
This is a ball bullet catch and strike from Prime-Line. Bright brass finished solid brass. 1/2 inch by 1-1/2 inch long barrel for mortise installation. Used on interior swinging closet or pantry doors.
Used in conjunction with closet or pantry doors
Mortise installation
1/2 inch by 1-1/2 in
Solid, bright brass
Adjustable
All the necessary mounting hardware is included for a quick and easy installation
A Phillips head screwdriver is required for installation
For further dimensional information, please see the line drawing
CAMO Premium Deck screws are perfect for face fastening wood deck boards, or securing other exterior projects. These are 3 in. (76 mm) #9 green buglehead screws that feature a T25 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Deck screws come with a power bit.
3 in. (76 mm) #9 green buglehead deck screw, T25 star drive, power bit included
Multi-purpose screw for face fastening wood deck boards and securing other exterior projects
Type 17 slash point makes for fast starts and no pre-drilling, 2/3 thread design pulls board tight
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
100-count covers approximately 30 sq. ft. (joist spacing of 16 in.)
CAMO Premium Deck screws are perfect for face fastening wood deck boards, or securing other exterior projects. These are 1-5/8 in. (41 mm) #8 tan buglehead screws that feature a T20 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Deck screws come with a power bit.
1-5/8 in. (41 mm) #8 tan buglehead deck screw, T20 star drive, power bit included
Multi-purpose screw for face fastening wood deck boards and securing other exterior projects
Type 17 slash point makes for fast starts and no pre-drilling, 2/3 thread design pulls board tight
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
100-count covers approximately 30 sq. ft. (joist spacing of 16 in.)
CAMO Premium Deck screws are perfect for face fastening wood deck boards, or securing other exterior projects. These are 1-5/8 in. (41 mm) #8 tan buglehead screws that feature a T20 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Deck screws come with a power bit.
1-5/8 in. (41 mm) #8 tan buglehead deck screw, T20 star drive, power bit included
Multi-purpose screw for face fastening wood deck boards and securing other exterior projects
Type 17 slash point makes for fast starts and no pre-drilling, 2/3 thread design pulls board tight
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
100-count covers approximately 30 sq. ft. (joist spacing of 16 in.)
4-PACK CAMO 3 in. #7 ProTech Green Premium Star Drive Trim Screws (100-Count)
CAMO Premium Trim screws are perfect for decking, exterior trim, and fencing projects. These are 3 in. (76mm) #7 trimhead screws that feature a T15 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Trim screws come with a power bit.
3 in. (76 mm) #7 trimhead screws, T15 star drive, power bit included
Screw for decking, exterior trim, and fencing projects
Trimhead reduces visibility and type 17 slash point ensures fast starts with no pre-drilling
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
2-PACK CAMO 3 in. #7 ProTech Green Premium Star Drive Trim Screws (100-Count)
CAMO Premium Trim screws are perfect for decking, exterior trim, and fencing projects. These are 3 in. (76mm) #7 trimhead screws that feature a T15 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Trim screws come with a power bit.
Highlights
3 in. (76 mm) #7 trimhead screws, T15 star drive, power bit included
Screw for decking, exterior trim, and fencing projects
Trimhead reduces visibility and type 17 slash point ensures fast starts with no pre-drilling
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
4-PACK 2 in. #7 ProTech Green Premium Star Drive Trim Screws (100-Count)
CAMO Premium Trim screws are perfect for decking, exterior trim, and fencing projects. These are 2 in. (51 mm) #7 trimhead screws that feature a T15 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Trim screws come with a power bit.
2 in. (51 mm) #7 trimhead screws, T15 star drive, power bit included
Screw for decking, exterior trim, and fencing projects
Trimhead reduces visibility and Type 17 slash point ensures fast starts with no pre-drilling
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
2-PACK 2 in. #7 ProTech Green Premium Star Drive Trim Screws (100-Count)
CAMO Premium Trim screws are perfect for decking, exterior trim, and fencing projects. These are 2 in. (51 mm) #7 trimhead screws that feature a T15 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Trim screws come with a power bit.
2 in. (51 mm) #7 trimhead screws, T15 star drive, power bit included
Screw for decking, exterior trim, and fencing projects
Trimhead reduces visibility and Type 17 slash point ensures fast starts with no pre-drilling
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
200-PACK CAMO 2″ #8 ProTech Tan Premium Star Drive Bugle-Head Deck Screws
CAMO Premium Deck screws are perfect for face fastening wood deck boards, or securing other exterior projects. These are 2 in. (51mm) #8 tan buglehead screws that feature a T20 Star Drive for reduced cam outs, a Type 17 slash point for fast starts, and 2/3 thread design to pull the boards tight. Their ProTech coating is ACQ compatible, passing a 1500-hour salt spray test in accordance with ASTM B117. All Premium Deck screws come with a power bit.
2 in. (51 mm) #8 tan buglehead deck screw, T20 star drive, power bit included
Multi-purpose screw for face fastening wood deck boards and securing other exterior projects
Type 17 slash point makes for fast starts and no pre-drilling, 2/3 thread design pulls board tight
ProTech coating is ACQ compatible passing a 1500-hour salt spray test in accordance with ASTM B117
100-count covers approximately 30 sq. ft. (joist spacing of 16 in.)
10-PACK National Hardware Hinges 1-1/2″ By 1-1/4″ Oil Rubbed Bronze N211-020
Commercial door hinges steel -square corner -full mortise standard weight template 4-1/2 x 4-1/2 inch bagged (swl) 90 lbs. Finish=prime coat. Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws.
Capacity: Architectural Grade Hinges
Color: USP Prime Coat Gray
Installation: Mortise With Metal Machine & Wood Screws
Material: Cold Rolled Steel
Product Class: Commercial Template Square Corner Door Hinges
Size: 4-1/2 Inch
You will recieve 5 Packs with 2 Hinges each [ 10 Pieces Total ]
4-PACK National Hardware Hinges 1-1/2″ By 1-1/4″ Oil Rubbed Bronze N211-020
Commercial door hinges steel -square corner -full mortise standard weight template 4-1/2 x 4-1/2 inch bagged (swl) 90 lbs. Finish=prime coat. Five knuckle, for use on internal or external doors of medium weight and average frequency. Commercial grade with thicker gauge and more durable design than standard hinges. Template screw hole location for use on either wood or hollow metal doors and frames. Equipped with easily seated, non-rising removable pins. Conforms to ANSI/BHMA Grade 3. Includes wood & machine screws.
Capacity: Architectural Grade Hinges
Color: USP Prime Coat Gray
Installation: Mortise With Metal Machine & Wood Screws
Material: Cold Rolled Steel
Product Class: Commercial Template Square Corner Door Hinges
Size: 4-1/2 Inch
You will recieve 2 Packs with 2 Hinges each [ 4 Pieces Total ]
